Side Lamp (side_lamp) v1.0.0
============================================================

Controls the LED side lamp wired to Jarvis -- on, off, and color. Separate from the emotion-state animations, which are dashboard-only.

HOW TO INSTALL
  Open your Jarvis dashboard -> Library -> Install skill,
  and upload this .zip file. Jarvis restarts itself and the
  skill is live. Nothing else to copy by hand.

HARDWARE YOU NEED
  - Addressable LED strip or ring (WS2812B / SK9822 class)
  - 5V supply for the LEDs

WIRING
  Header pin 19 (SPI MOSI) -> LED data in
  Header pin 23 (SPI SCLK) -> LED clock (clocked strips only)
  GND          -> Shared ground with the LED supply

SETUP
  1. Wire the LED data line to the marked pins.
  2. Power the LEDs from a 5V supply, sharing ground.
  3. Open the Side Lamp page and press Test.
