← Skill library
home
Side Lamp
An LED lamp that shows what Jarvis is doing
Download v1.0.0
3.7 KB · .zip
Install from your dashboard:
Library → Install skill → upload this file.
An SPI-driven LED lamp wired straight into Jarvis -- no WiFi, no second board. It glows with Jarvis's current state and can pulse in time with music or speech.
What it does
- On, off and colour by voice
- Reacts to music and to Jarvis speaking
- Wired directly in, so there is no network for it to drop off
Things you can say
“turn on the lamp”
“lamp on”
“switch on the side lamp”
“lamp ko on karo”
“लैंप ऑन करो”
“turn off the lamp”
Hardware you need
- Addressable LED strip or ring (WS2812B / SK9822 class)
- 5V supply for the LEDs
Wiring
| Pin | Connects to |
|---|---|
Header pin 19 (SPI MOSI) | LED data in |
Header pin 23 (SPI SCLK) | LED clock (clocked strips only) |
GND | Shared ground with the LED supply |
Setting it up
- Wire the LED data line to the marked pins.
- Power the LEDs from a 5V supply, sharing ground.
- Open the Side Lamp page and press Test.